Technique #1- 3 Tier Stamping

3 tier stamping is a fun and easy way to create a layered card or background for a scrapbook page. This technique uses three layers of paper that gradually shrink in size. When stamped this layering creates a cascading effect with the stamped image. When practicing this technique, it is easier to use a stamp that has a flourish image.

You can find a printable version of these directions here.

Materials-
-(1) 8 1/2x11" piece of white cardstock
-(1) 8 1/2x11" piece of colored cardstock
-(1) stamp with a flourish
-(1) card base of 8x5 1/2" folded in half
-ink in your choice of color (chose an ink that won't run when using the distressing ink like Memento)

-distressing ink a coordinating color to the ink used to stamp the flourish-this should be lighter than the stamping ink
-distress ink applicator
-ashesieve
-1/8' pop dots
-fibers or ribbon for embellishment

Directions-
-Cut the colored cardstock into three pieces measuring (1) 3 3/4x5 1/4, (2) 2 3/4x4 1/4, and (3) 1 3/4x 3 1/4"
-Cut the white cardstock into three pieces measuring (1) 4x5 1/2", (2) 3x4 1/2", and (3) 2x3 1/2"
-Using a small piece of adhesive, layer the three white pieces of cardstock so that the smallest piece is on top (You may have to dull the hold of the adhesive by pressing and lifting your finger off of it)
-Ink up the stamp using selected color
-Stamp randomly across the three layers of white cardstock making sure the flourish overlaps the layers of paper.
-Continue inking and stamping (for this size card about 3-4 times)
- Peel the three layers apart and apply distress ink using applicator tool.
-Adhere the stamped pieces to their coordinating sized background paper.

IMPORTANT- Check your stamped images to make sure they are going the right way and mimic the stamp image across the layers.


-Adhere the top and middle layer together by centering the top layer over the middle.
-Wrap ribbon or fibers to embellish around the top and middle layer.
-Use pop dots to adhere top two layers to bottom layer.
-Adhere bottom layer to card base and enjoy. 

Entry for the Core'dination Online Crop Color Challenge

Good Evening Everyone!

It's been a busy day! I just got home and it's ten o'clock at night here in New Hampshire. I was at Stamping Memories in Belmont New Hampshire helping set up for the Second Chance with Saving Grace Crop Fundraiser tomorrow. The Crop will be from 11am to 5pm.

This morning I worked on another challenge from the Core'dination Online Crop. Today's project focused on Lydia's color challenge. This is what I came up with:

I cut the flowers out using the George and Basic Shape Cricut Cartridge at three different sizes. The flowers are the two different reds layered together. I layered the two green and used the blue as the rectangle for a sentiment. The white paper in the center of the blue card stock is actually inked using Tim Holtz Distress Ink in Tumbled Glass.

I also made a portfolio to hold the four note cards and envelopes.

Thanks for stopping by my blog.

Entry for Core'dination Online Crop-Day 2 Challenge 14 from Kristine

On to the third day of  Core'dination's online crop! Last night I finished up my take on Kristine's sketch for Challenge #14.

Here is the sketch:

 Here is my take on the challenge:

 I decided to use paper from the Black Magic Collection. I used six different colors to complement the pattern paper. I used Protect (around vertical striped paper), Warlock is the 12x12 piece, Wizard (around the word print paper), The Alchemist (behind the eyes), and Magic (behind the dotted paper and sentiment). I used Tim Holtz Distress Ink in Wild Honey to soften the edges of the pattern papers and on the sentiment.

This Challenge really pushed me to not be afraid of using a large variety of papers. I used 13 different papers total on this one 12x12 page. I'm so proud of myself for [pushing beyond my conservative look on my supplies. Thanks Kristine for your challenge!

Card Kits Available on eBay

Good Morning Everyone,

Last night I posted two items on eBay for purchase. One is a new card kit using a Mardi Gras mask stamp from Rubbernecker stamps. The other is a six pack of my Steampunk themed rose cards. By clicking on the pictures below, you can see the eBay pages for the two different items.

How to Etch Glass

Materials
     masking tape 3M 2020 Scotch Masking Tape for Production Painting, 3/4-Inch x 60-Yard, 1-Pack
     Cricut Vinyl Cricut Cuttables Vinyl 2 12-Inch-by-24-Inch-Sheets, Raven (Black)
     Indie Art Cricut Cartridge Cricut Solutions Cartridge, Indie Art
     Cricut Transfer TapeCricut Cuttables Vinyl Transfer Tape 4 12-Inch-by-24-Inch-Sheets
     Cricut Cricut 29-0001 Personal Electronic Cutting Machine
     Glasses Riedel Ouverture Magnum Red Wine Glass, Set of 6 plus 2 Bonus Glasses
     Etching Solution Glass Etching Cream - 22 oz
     Soap and water

Steps:
    1. Cut design out of vinyl using your choice of cartridges. (In this video I used the skull and cross bones from the Indie Art Cartridge)

     2. Using the transfer tape, transfer the vinyl that the image was cut from to the glass(es)

    3. Use the masking tape to cover the area surrounding the vinyl.

    4. Wearing gloves and in a well ventilated area, apply the etching solution to the cut out area of the design. Cover it well.

    5. Allow the solution to stay on the glass for about 10-15 minutes.

    6. Wash the etching solution of the glass using soap and water.

    7. Pat glass dry using paper towels. Then remove the masking tape and vinyl.

    8. Wash the entire glass again using soap and water.