Technique #1- 3 Tier Stamping

3 tier stamping is a fun and easy way to create a layered card or background for a scrapbook page. This technique uses three layers of paper that gradually shrink in size. When stamped this layering creates a cascading effect with the stamped image. When practicing this technique, it is easier to use a stamp that has a flourish image.

You can find a printable version of these directions here.

Materials-
-(1) 8 1/2x11" piece of white cardstock
-(1) 8 1/2x11" piece of colored cardstock
-(1) stamp with a flourish
-(1) card base of 8x5 1/2" folded in half
-ink in your choice of color (chose an ink that won't run when using the distressing ink like Memento)

-distressing ink a coordinating color to the ink used to stamp the flourish-this should be lighter than the stamping ink
-distress ink applicator
-ashesieve
-1/8' pop dots
-fibers or ribbon for embellishment

Directions-
-Cut the colored cardstock into three pieces measuring (1) 3 3/4x5 1/4, (2) 2 3/4x4 1/4, and (3) 1 3/4x 3 1/4"
-Cut the white cardstock into three pieces measuring (1) 4x5 1/2", (2) 3x4 1/2", and (3) 2x3 1/2"
-Using a small piece of adhesive, layer the three white pieces of cardstock so that the smallest piece is on top (You may have to dull the hold of the adhesive by pressing and lifting your finger off of it)
-Ink up the stamp using selected color
-Stamp randomly across the three layers of white cardstock making sure the flourish overlaps the layers of paper.
-Continue inking and stamping (for this size card about 3-4 times)
- Peel the three layers apart and apply distress ink using applicator tool.
-Adhere the stamped pieces to their coordinating sized background paper.

IMPORTANT- Check your stamped images to make sure they are going the right way and mimic the stamp image across the layers.


-Adhere the top and middle layer together by centering the top layer over the middle.
-Wrap ribbon or fibers to embellish around the top and middle layer.
-Use pop dots to adhere top two layers to bottom layer.
-Adhere bottom layer to card base and enjoy. 

Twilight Lay out Part 2

Materials: use the same materials as Twilight Lay out Part 1

Instructions:
1. mount 6x6 piece of stripe paper and paisley paper to bottom of 12x12 black card stock.
2. mount 2.5x12 piece of stripe paper to black cardstock a quarter inch down from top of page
3. mount 2x12 piece of paisley paper on bottom edge of strip stripe.
4. mount .5x12 piece of deep red cardstock on bottom edge of paisley stripe.
5. mount 4.5x6.5 deep red photo mat a half inch down from top and half inch in from right side of page.
6. mount 4.5x6.5 deep red photo mat in lower left side of page, half inch in from left edge and bottom of page.
7. create a journaling box by mounting a 2.5x3 piece of cream paper on to a 3x3.5 piece of deep red paper and adhere to page in top left corner about an inch down from top and 1.5 inches in from left edge.
8. Add two 4x6 photos and enjoy