Wednesday, September 3, 2014

What's Black and White with Accents of Red?

Good Morning!

It has been a busy few days. This week I'm on vacation from my full time job. I have decided to devote most of this vacation to my crafts and art. I have finished two altered jewelry boxes and a few cards so far.

Adam Bagni has been busy drawing and designing digital stamps too. I will be posting these digital stamps in the Butterfly Garden on Friday. 

But back to the topic of this post....

What's Black and White with Accents of Red?

This jewelry box!

I used paper from Cloud 9 Designs called "71382 C9 NS Glitter Paper Pad 24sh/2s" and Core'dinations smooth black cardstock.

Originally the jewelry box had wood dowel handles. I cut them off and sanded the area smooth with sandpaper. I removed all the hardware and put them in to a ziplock bag. I then painted the entire wooden jewelry box with Apple Barrel "2043 White" acrylic paint.

With the top of the box removed, I began measuring and cutting pieces of paper to line the inside and outside of the top. I cut the pattern paper to be 1/8" smaller than the black cardstock. I ran each layer through my Xyron Create a Sticker and adhered them together. I used this adhesive to adhere the paper to the painted jewelry box.

Inside the cover there is a mirror. I used an X-acto knife to cut angles in the paper to create a seam between stripes of layered paper.

I used Mod Podge for Furniture to seal the paper to the painted wood. I covered every nook and cranny of the top (except the mirror). I set this aside to dry.

Next I began cutting pieces to cover the rest of the outside of the jewelry box. Again I cut the pattern paper 1/8" smaller than the black cardstock.

I measured and cut around the edges of the jewelry box where the drawer cut our is located. 



 I continued this process with the drawer and tray. Every surface once covered with paper including the bottom trim was sealed with the Mod Podge.


Once the Mod Podge was set I cut and lined the bottom of the tray and drawer with velvet paper in red. I used two clear drawer knobs that I purchased from Michael's to accent the front of the drawer and the jewelry box. I placed a red rhinestone inside each of the knobs and sealed it with E6000. I used the E6000 to adhere the knobs to the front of the jewelry box.



Once the jewelry box was dry, I used rhinestones to accent the top of the box and strips of velvet paper to accent the inside of the top. 


I then reattached the hardware. 

I hope you enjoyed stopping by and seeing this project.

Happy Crafting!